Digital Wireless - SD7000
Introducing the TRANTEC SD7000 Series - Setting the Standard in Digital Wireless Technology.
Click here for the brochure.
|
Trantec announce the SD7000, the world’s first serious professional quality digital wireless microphone system.
|
Digital Audio Transmission
Audio information enters the digital domain at the microphone head and is output from the receiver in digital AES3 format or conventional analogue audio via XLR.
Increased Channel Capacity
Digital transmission allows more users within the same band without suffering the artefacts associated with intermodulation problems.
24 bit resolution
Professional quality audio resolution.
Network Monitoring
Networking capability allows full control and monitoring of up to 60 channels. The software also includes scanning, walk test, intermodulation calculator and packet audio technology allowing audio monitoring over the network.
No Analogue Compandor Effects
Linear A/D’s mean the audio is free from dynamic non-linearities commonly associated with all compandors.
Metal housing
Both the beltpack and handheld are built in high quality metal housings designed to stand up to the rigours of broadcast, theatre, touring and other professional applications, the dual receiver is 1U 19” full width rack.
SD7000 System Specification
| RF frequency: | 692MHz to 752MHz, EBU CH48-56 Other bands available on request |
| Modulation type | Proprietary Digital |
| RF Bandwidth: | <200KHz |
| AF Dynamic range: | > 105 dBA |
| AF THD+N: | < 0.05% |
| Audio Frequency Response: | 20Hz to 16kHz |
| Digital audio resolution: | 24bit |
| Digital Audio output: | AES3 (AES/EBU) 48kHz |
SD7802 Dual Channel Digital Receiver
| RF frequency: | 692MHz to 752MHz, EBU CH48-56 Other bands available on request |
| RF connector type: | BNC (50 ohm) front / rear mount |
| Word clock input: | 75 ohm or Hi-Z selectable |
| Head phone monitor: | ¼” jack with mix option |
| AF Output: | XLR / ¼” jack Mic/line |
| Enclosure type: | 19” 1U full width |
| Network connectivity | TCP/IP |
| Power | 110/240 Vac 50/60 Hz |
SD7200/10 Handheld Transmitter
| RF frequency: | A Band: 692MHz to 722MHz, B Band: 722-752MHz, EBU CH48-56 Other bands available on request |
| RF power: | 50mW peak typical |
| RF Bandwidth: | <200KHz |
| Audio attenuator: | 15 dB range |
| Capsule type: | Audio-Technica MU-36B Unidirectional dynamic Trantec MC-28 Unidirectional Condensor. |
| Battery type: | 2 x AA alkaline cells |
| Battery life: | > 6 hours |
| Size: | 250 x 38mm (Inc Grille) |
| Weight: | 300g |
SD7300 Beltpack Transmitter
| RF frequency: | A Band: 692MHz to 722MHz, B Band: 722-752MHz, EBU CH48-56 Other bands available on request |
| RF power: | 50mW peak typ |
| RF Bandwidth: | <200KHz |
| Audio attenuiator: | 30 dB range |
| AF connector: | LEMO 3pin sub-min connector |
| AF Impedance: | Switchable Hi/Lo |
| Battery type: | 2 x AA alkaline cells |
| Battery life: | > 6 hours |
| Size: | 85 x 62 x 18mm |
| Weight: | 120g |
WD7800 Antenna Distribution Unit
| RF frequency: | 692MHz to 752MHz, EBU CH48-56 Other bands available on request |
| RF input: | 2 BNC sockets (diversity), 50ohm |
| RF Ouput: | 4 BNC sockets per antenna, 50ohm |
| RF cascade output: | available (-3dB), 2 BNC sockets (diversity), 50ohm |
| Selectable bands: | 2 bands, each 30MHz bandwidth |
| Power supply: | 120/230VAC 50/60Hz 100mA |
| Dimensions: | 482 x 44 x 362.6 mm (1U), |
| Weight: | 4.1kg approx |