S4.16W Aerobic System
The S4.16W Trantec wireless microphone system provides fitness and aerobic facilities with the smartest choice for all their wireless needs. The system can offer a choice of 16 selectable frequencies on UHF band 854-865MHz (CH69 & 70) which will allow simultaneous operation of up to 12 systems. The S4.16 also features rear detachable antennas.
The Trantec S4.16W comes with our popular SJ66 Aerobic headworn microphone. This heavy duty waterproof microphone is designed for years of rugged use. The adjustable gooseneck boom is sealed for protection against water, dust, and perspiration. It is surprisingly light and flexible for a comfortable fit. It has an adjustable headband for secure placement during the most rigorous exercise routines, also available in a choice of three colours Black, Blue & Yellow. Also included with the system is our neoprene belt, which provides freedom of movement and protects your transmitter.
This selectable frequency system allows for operation even in larger cities where broadcast interference and other wireless systems can create problems, making the Trantec S4.16 the idea choice for fitness and aerobic facilities.
 TS-66 Headworn Microphone in yellow |
 TS-66 Headworn Microphone in blue |
 TS-66 Headworn Microphone in black |
TECHNICAL SPECIFICATION
| S4.16RX RECEIVER |
| RF Frequency Range: Channel 70 Frequencies; 863.150, 863.725, 864.150, 864.850MHz Channel 69 Frequencies 854.900, 855.900, 856.175, 856.575, 857.950, 858.200, 858.650, 859.500, 860.400, 860.900, 861.200, 861.750 MHz |
| 16 Channel Capability |
| Audio Frequency Response: Handheld 80Hz-16kHz (+/-3dB), Belt pack 60Hz-16kHz (+/-3dB) |
| Audio S/N Ratio: >96dBA |
| Audio output: Variable to +10dBu via unbalanced 1/4" mono jack, +16 dBu via balanced XLR 3F |
| Display: 4 position RF bar graph, AF Peak (Overload), Diversity A/B |
| DC Input: 12V, 100mA |
| Dimensions: 35 x 213 x 98mm |
| Weight: Approx 580g |
| S4.16LTX BELTPACK TRANSMITTER |
| 16 Channel capability |
| Controls: Frequency select, On/Off switch, Lapel/Instrument select, Gain adjust |
| Indicator: Battery status LED |
| Operating voltage 9v @ <50mA |
| Operating time approx 10 hours |
| Power Output: Max 10mW |
| Connectors: Audio input via 3.5mm jack socket |
| Dimensions: 60 x 100x 30mm including belt clip |
| Weight: Approx 90g |
| Fully meets with requirements of ETSI 300-422/455, FCC part 74h |